Search Results

Filter By

Singapore Standards Package/Series ISO IEC

16016 Results. Sorry, we cannot find result for ("ss293 form centrelink") , perhaps what you trying to look for are …

ISO 13776:2020 [Current]

Ships and marine technology — Ship's mooring and towing fittings — Pedestal fairleads

ISO 13779-2:2018 [Current]

Implants for surgery — Hydroxyapatite — Part 2: Thermally sprayed coatings of hydroxyapatite

...Ishiyaku EuroAmerica, Tokyo, 1994 [7] ASTM F1926, Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings [8] Markovic M...

ISO 13779-3:2018 [Current]

Implants for surgery — Hydroxyapatite — Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity

...Determination of the signal-to-noise ratio is performed: for the Detection limit: establishing the minimum concentration at which the analyte can be reliably detected...
...formula, like an example, S N mq =? + %fph , where m and q are known, Calculate DL as: DL= S N q m , where S/N=3 for TTCP, -TCP, -TCP and CaO...
...form at the most, two phases: - and/or -tricalcium phosphate and hydroxyapatite, if the Ca:P ratio is below 1,667; hydroxyapatite and calcium oxide, if the Ca:P ratio is above 1,667...

ISO 13779-4:2018 [Current]

Implants for surgery — Hydroxyapatite — Part 4: Determination of coating adhesion strength

ISO 13781:2017 [Current]

Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing

...Additional testing specified by the parties submitting the sample or other parameters as determined by the test house can be performed...
...Table 1 Mechanical test methods for consideration Form Test method reference Rigid material ISO 178 ISO 180 ISO 527-1, ISO 527-2 ISO 6721-2 ISO 604 ISO 14130 ASTM D2990 Film, foil, sheet ISO 527-3 Fibre, textile ISO 2062 ISO 1805 ISO 13934-1 5...
...formation: a) test material description, batch or lot number and dimensions (including thickness); b) real-time degradation environment: 1) temperature, 2) sample retrieval intervals, 3) fluid flow and/or loading conditions (if relevant to intended cl...

ISO 13784-1:2014 [Current]

Reaction to fire test for sandwich panel building systems — Part 1: Small room test

...The installations shall be performed in accordance with existing regulations...
...Depending on the use of the test results, two options are available to perform the heat and smoke release measurements...
...The measurement values give information about hazards a) and b) (see Clause 4)...

ISO 13784-2:2020 [Current]

Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms

...The former shall be type K chromel/ alumel stainless-steel sheathed thermocouples with a wire diameter of 0,3 mm and an outer diameter of (1,5 0,1) mm...
...formation: a) name and address of testing laboratory; b) date and identification number of report; c) name and address of sponsor; d) purpose of test; e) method of sampling; f) name and address of manufacturer or supplier of product; g) name or other ...

ISO 13785-1:2002 [Current]

Reaction-to-fire tests for façades — Part 1: Intermediate-scale test

ISO 13785-2:2002 [Current]

Reaction-to-fire tests for façades — Part 2: Large-scale test

...The duration of the conditioning period shall conform to the manufacturer''s instructions for curing components...
...1 The performance of the test specimen shall be assessed on the basis of visual observations recorded and recorded data...
...2 Thermocouples installed within the specimen shall provide information about fire spread within each layer of the specimen and within any cavities...

ISO 13786:2017 [Current]

Thermal performance of building components — Dynamic thermal characteristics — Calculation methods

...4 Period of the thermal variations The definition of dynamic thermal characteristics and the formulae for their calculation are valid for any period of thermal variations...
...3 Heat transfer matrix of a homogeneous layer The periodic penetration depth for the material of the layer, , is calculated from its thermal properties and the period T using Formula (11)...
...3 Areal heat capacities The areal heat capacities are 1 = T Z Z 2 1 11 12 (22) and 2 22 12 2 1 = T Z Z (23) Formulae (22) and (23) apply to both external elements and to internal partitions...

Page 222 of 1602